Finishing Up The Bell
I added a handle and small bow as two separate pieces to the carved bell. Both the handle and the bow have a little dowel drilled into the neighbouring pieces to locate it and were epoxied in place after I had finished the painting. That bow was actually a lot of fun to carve.
The handle is several light coats of asphaltum brown. The bow is cherry red and gold. You can see from the previous photo that I separated the two colours with a wood burning line. This not only looks nice but it also makes a bit of a dam when you’re painting…the two separate colours stop dead at that line and don’t bleed one into the other.
The face is flesh colour with some red mixed in for the nose and cheeks and some Payne’s grey above the eyes. The brass portion of the bell is alternating light coats ( washes ) of gold and “worn penny”…which looks like copper. I was quite surprised that the flesh colour of the face blended nicely into the brass colour without looking odd. At least as non-odd as a bell with a face can be…
After a bit of dry brushing with a beige colour to pick up the high spots on the knife cuts, the whole thing got a light coat of satin urethane. A slightly grumpy looking Christmas Bell and a fun project.
tributesinwood 