tributesinwood

Wood Carvings by Mark Sheridan

Cowboy…err…Cowgirl Boots

Time for some detail on the boots.

I started by calling up some images on the computer and choosing a boot style that I thought would look nice on this carving. Some very minimal carving gave me the basic shape that I wanted and I carved in a bit of relief followed by some wood burning to show the upper boot from the lower boot leather as well as an indication of some boot straps. I basically used a ruler to make sure that I had the left and right boots the same height and width. Remember that the inside and outside of your footprint is different…take a look at the bottom of one of your dress shoes and copy that pattern for the bottoms of your boots. Making a pencil “etching” pattern of the bottom of one of the shoes, cutting it out from the paper and flipping it over to draw on to the other foot is a good way of ensuring that the boots are going to be the same size.

I drew up a little decorative pattern for the upper boot and cut that to make a paper pattern. Again, flipping it over and redrawing the pattern onto the boot created a uniform pattern completely around the boot. With a bit of initial wood burning followed by some slight and shallow carving around the wood burning, produced an elevated “leather” pattern. Some burned “stitches” and some very slight addition of creases in the leather completed the detail for the boots.

Single Post Navigation

2 thoughts on “Cowboy…err…Cowgirl Boots

  1. The right one for buck dancing & fildle playing.

    Like

  2. They should do the trick, Peter.

    Like

Leave a Reply to marksheridan Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: